PC68 Pool Vacuum, Upgraded 26.5 GPM Beast-Level Suction

The Enhulk PC68 is a handheld, cordless pool vacuum designed for spot cleaning inground pools, above-ground setups, spas, and hot tubs. It eliminates the hassle of dragging long hoses or managing cords by running on a self-contained rechargeable battery. If you already run an automatic cleaner or need a quick way to clean steps, ladders, and tight corners, this handheld unit fills that gap directly.

Cleaning power comes from a high-flow motor delivering 26.5 GPM suction and a 6000 L/h drainage rate. To handle different debris sizes, it includes two specialized filters capable of picking up fine sand and silt as well as larger debris like acorns, leaves, and twigs. The tool-free assembly and one-button startup keep the entire process straightforward, while the ergonomic non-slip handle and 60dB quiet operation keep cleaning comfortable.

Power is supplied by a 5200mAh battery that provides up to 60 minutes of non-stop cleaning after a 4-hour charge. For physical reach, the standard PC68 includes a 6-foot snap-lock extension pole, allowing it to service pools and spas between 1.5 feet and 10 feet deep in water temperatures from 32 to 122 degrees Fahrenheit.

There are a few operating conditions to keep in mind. The vacuum requires at least 1.5 feet of water depth and is not suitable for zero-depth shallow areas. Suction stops if the outlet rises above the water surface, and the filter bag must be installed before turning the unit on to maintain suction. Additionally, a full battery recharge takes 4 hours, which limits immediate back-to-back cleaning sessions.

Verdict: The Enhulk PC68 is a great choice for pool and spa owners who need a dedicated, cordless spot-cleaner for steps, corners, and tight areas. Its strong suction and dual filtration system make it a reliable partner alongside larger automatic cleaners.

• Suction Flow Rate: 26.5 GPM (6000 L/h)
• Battery Capacity: 5200mAh
• Run Time: Up to 60 minutes
• Charge Time: 4 hours
• Operating Noise: 60dB
• Pole Length: 6-foot snap-lock pole
• Operating Water Depth: 1.5 ft to 10 ft (0.45 m to 3 m)
• Water Temperature Range: 32°F to 122°F

A great fit if you:

• Need to clean pool steps, ladders, corners, and tight spots that larger cleaners miss.
• Want a cordless vacuum without dealing with tangled hoses or power cords.
• Maintain a spa, hot tub, or pool between 1.5 and 10 feet deep.
• Need to filter out both large debris like leaves and fine particles like sand or silt.

Consider something else if you:

• Need to clean zero-depth pool entries or extremely shallow ledges under 1.5 feet deep.
• Require continuous, all-day cleaning without waiting for a 4-hour battery recharge.

How long does the battery last and how long does it take to charge?
The built-in 5200mAh battery provides up to 60 minutes of continuous cleaning time and takes approximately 4 hours to reach a full charge.

Can this vacuum be used in hot tubs and spas?
Yes. It works in water temperatures ranging from 32°F to 122°F and handles water depths between 1.5 feet and 10 feet.

Why is the vacuum losing suction?
Loss of suction typically occurs if the water outlet is lifted above the water surface, if the filter bag is not properly fitted before use, or if the water is shallower than 1.5 feet.